ED-RIO-4-24VDC EDRIVE WIRELESS REMOTE CONTROL
ED-RIO-4-24.pdf (511.62 KB)
ED-RIO-4-24.pdf (511.62 KB)
The wireless remote-control uses remote I/O design for wirelessly controlling various of device. It is intelligently controlled by a microprocessor and has the advantages of easy installation, simple use, safety and reliability.
1. Voltage Supply: DC 24V
2. Current Leakage: ≤9mA
3. Max load current: 10A 30VDC
4. Load power: One Channel ≤200W, Critical load ≤80W.
(Add on external relay if higher load required)
5. Receiver sensitivity: -105dBm
6. Working Frequency: 315MHz
7. Remote Control Distance: Empty space without blocking (50Meters)
8. Output Type: Relay Terminal NC & NO
9. Control Mode: Default as Detent Mode, (User may change control mode)
Jumper at T = Detent mode (T);
Jumper at Mis Jog Mode (M);
No jumper in both T & M is interlock mode (L).
(Reminder: All control must be set during power off condition)
10. Control Channel: 4 Channels
Detent mode: Press once, Relay On, press again, Relay Off.
ABCD each channel can work independently.
Jog mode: Long press remote Button - Relay ON, depress remote button - Relay OFF
All channel couldn’t work at same time, each time only apply for one channel;
Interlock mode: Press button A, Channel A “ON”,
Press button B, Channel A “OFF” & Channel B “ON”,
Press button C, Channel B “OFF” & Channel C “ON”,
Press button D, Channel C “OFF” & Channel D “ON”.
11. Paring Method: Upon power on, press SI button, indicator light “ON”. Release button “SI” &, press remote control button (any button) indicator light “OFF” means remote control & control pairing successfully.
12. Remove pairing control: Press SI button, indicator light “ON” for 8 sec, after indicator light “OFF” release “SI” button, all remote control will be unpair.
iMS Motion Solution (Johor) Sdn Bhd (Company Registration 1098771-W)
No.7, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia.
TEL:+607-8635240 FAX: +607-8637240
EMAIL: email@example.com | WhatsApp | www.ims.com.my
HOTLINE : 1700-818-330Return / Refund Policy :
whatsapp us now !
whatsapp us now !
| MEISTER | GGM | Sanyo Denki | ElectroCraft | EDrive | SHIHLIN ELECTRIC | AUTONICS | UI Robot | Mitsubishi CNC | PANASONIC| Apex Dynamics | NISSEI GTR | UNIPULSE | CREVIS
| MOTION DEVICES SPECIALIST | SYSTEM and CONTROL INTEGRATION |
| Induction Motor | Speed Control Motor | Reversible Motor |Brake Motor |BLDC Motor |DC Motor |Planetary Gear Motor | Servo Motor | Stepping Motor | Linear Actuator Motor | Lead Screw Motor|Close Loop Stepping Motor | Customization Motors | Right Angle Gear Head | Precision Gear Reducer |PLC | Motion Controller |HMI /Touch Screen| Inverter |CNC Controller |Multi Axis Robots |IPC | SCADA |Monitoring Software | Embeded PC | Remote IO |TPC | Motion Card | Loadcell |PPC |
All goods sold are not returnable & we accept goods ex-change with equal or lower value of good purchased. If the ex-change items are higher than purchased items, buyer shall top up the differential cost. All payment made are not refundable, please confirm the purchase items code & cost with our sales representative before place orders.
Shipping and Fulfillment :
Thank you for your purchase. Once we have confirmed your payment, we will prepare and ship out your order out within 24-48 hours.( For ex-stock items only, Indent items subject to delivery stated in quotation & conversation in emails). Once your order has been shipped out, you will receive an email notification with the tracking number and tracking details inside.
General Statement of Principles
As described in detail below, any information we gather at this web site is strictly for our use and is not shared with any other entity, public or private, for any reason - period. We will not sell or give away any lists or other data that we may retain and we do not purchase such information from other sources.
Our servers (as most) track IP addresses and referring pages to help with site maintenance and improvements. This data is viewed only as anonymous statistics to show the busiest times of the day or week, pages with errors and how effective our advertising has been. This information is not used for any other purpose.
Personal Information Collected - Order Forms
With the exception of credit card info, we store the information from your order form to allow us to track consulting issues or refer to a previous order to help provide some customer service. You may elect to have your information completely removed from this system by e-mailing us at firstname.lastname@example.org with your request. We do not store any type of sales information.
Information Correction or Removal
If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at email@example.com with the details of your request. If you wish to contact us further, please find complete contact information on our contact page.
Cookies are files with small amount of data, which may include an anonymous unique identifier. Cookies are sent to your browser from a web site and stored on your computer's hard drive. We use 'cookies' to store your cart contents for you. You can instruct your browser to refuse all cookies or to indicate when a cookie is being sent. However, if you do not accept cookies, you may not be able to use the checkout section of our site.