|

Share:


F805AT Graphic display/touch panel type all-in-one type weighing indicator

Contact Us

Quantity:

F805AT adopts a color LCD touch panel which enables simple and comfortable operation by greatly enhancing the visibility of weight display, various setting values display and status display. It provides high-speed A/D conversion and digital processing capability at an operating speed of 1000 times/sec There are substantial interfaces that allow direct connection to major PLCs including OMRON DeviceNet and MITSUBISHI CC-Link. F805AT, which was developed specifically for weighing systems, is a full-fledged device of an all-in-one type that deserves to be called the top-of-the-line Weighing indicator.

Analog section
Excitation voltage 10V or 5V DC±5% (digital adjustment), Output current; within 120mA, remote sense type (Up to 4 loadcells at 350Ω are parallel-connectable.)
Zero adjustment range 0 to approx. 2mV/V (digital adjustment)
Gain adjustment range 0.3 to 2.0mV/V (digital adjustment)
Min. input sensitivity 0.3μV/count (at valid 1/4 scale division),
0.075μV/count (at invalid 1/4 scale division)
Accuracy Non-linearity: within 0.01%/FS (Typ: 0.005%/FS at room temperature)
Zero drift: within 0.1μV/°C RTI (Typ: 0.08μV/°C)
Gain drift: within 15 ppm/°C (Typ: 5 ppm/°C)
Noise: within 0.1μVp-p RTI (0.1 to 10 Hz)
Analog filter Bessel low-pass filter (-12dB/oct.)
Selectable from 2, 4, 6, 8 Hz
A/D converter Speed: 1000 times/sec (switchable to 200 times/sec.)
Resolution: 16 bit (binary)
Min. display resolution 1/10000 (at valid 1/4 scale division), 1/40000 (at invalid 1/4 scale division)
Secondary calibration Equivalent input calibration method that allows calibration by simply key-inputting the rated value of a sensor without applying an actual load
Min. calibration resolution at secondary calibration (1/1000 at room temperature)
 
Setting section
Setting method – Setting by touch panel operation
– Setting from host computer via RS-232C is also possible
Setting value storage – Default: NOV RAM (nonvolatile RAM)
– Other setting values: C-MOS RAM with backup of a lithium battery
(Depends on usage conditions and storing environment, but memory can be kept for approx. 7 years or more.)
Setting value protection Setting operation can be locked to prevent unauthorized modifications of default values and calibration by malfunction (LOCK)
 
I/O section
External signal output – Logic: Transistor’s open collector output (Emitter = COM terminal); Output is LO when transistor is ON.
– Near zero, SP1, SP2, SP3, Under, go, over, comp, discharge, Low limit, high limit, stable, weight alarm, error, final error, run or total limit External signal input
External signal input – Input is ON when shorted to COM terminal by contact (relay switch, etc.) or non contact (transistor, open collector, etc.).
– Gross/Net weight change, Digital zero, Tare off, Tare reset, Hold or judge, Feed/discharge change, Accumulation command, Accumulation clear, Start, Stop, Discharge command, Code No. designation, Forced-discharge command, Discharge gate open, Discharge gate close, Code No. designation selection, Graph drawing
Weighing code selection input BCD 2 digits (00 to 99), 100 codes
Interface – SIF: 2-wire type serial interface (standard): Interface to link with Unipulse printer or external display
– SI2: 2-wire type bi-directional serial interface (standard): Interface to link with peripherals such as a printer or display
– 232: RS-232C communication interface (standard): Write (change)/read weight data, various statuses and setting values via commands from host computer
– BCO: BCD parallel data output interface (Optional): Parallel interface to transmit weight data to various peripherals
– BCI: BCD parallel data input interface (Optional): Parallel interface to receive various setting values from external unit
– 485: RS-485 communication interface (Optional): Allows longer-distance communication than RS-232C. ID numbers are set, and multiple units of F805AT are parallel-connectable
– DAC: D/A converter interface (Optional): Interface to convert weight data to current signal and output it
– CCL: CC-Link interface (Optional): Interface to link F805AT with network such as MITSUBISHI general-purpose sequencer
– ODN: DeviceNet interface (Optional): Interface to link F805AT with DeviceNet such as OMRON CompoBus/D
 
Display section
Display TFT color LCD (Display area 116.8 (W) x 88.0 (H) [mm], 320 x 240 dot
Weight value display 5 digits, Minus sign on most significant digit
Unit Selectable from t, kg, g, N, lb, none
Decimal point Selectable 0, 0.0, 0.00, 0.000
Display update rate Selectable from 3, 6, 13, 25 times/sec (A/D conversion rate is fixed.)
Scale capacity 5-digit numerical values (up to 99999)
Over display LOAD: A/D converter input over, OFL1: Net weight > Net over set value (5-digit setting), OFL2: Gross weight > Capacity +9 scale divisions, OFL3: Gross weight > Gross over set value (5-digit setting)
Center zero True zero point (0±1/4 scale) or the center of each value is displayed
Status display LOCK, HOLD, ZALM, STAB, TARE, RUN, HI, LO, NZ, SP1, SP2, SP3, OVER, GO, UNDER, COMPL, DCHG
Set value display CODE, FINAL, OVER, UNDER, BEFORE FINAL, FF
Accumulation display Accumulation times (4 digits), Accumulation value (9 digits)
No. display Alarm No. (2 digits): Error No. in sequence control
Sequence No. (3 digits): Process No. in sequence control
 
General performance
Excitation voltage 100 to 240V AC (+10% -15%) (Free power supply 50/60 Hz)
12 to 24V DC (±15%) (Please specify when ordering)
Power consumption 20W
Inrush current (Type) 15A, 5msec: 100V AC average load condition (cold start at room temperature)
30A, 5msec: 200V AC average load condition (cold start at room temperature)
10A, 0.5msec: 12V DC average load condition (cold start at room temperature)
35A, 0.4msec: 24V DC average load condition (cold start at room temperature)
Operating conditions Temperature: Operating temperature range -10 to +40°C;
Storage temperature range -20 to +60°C
Humidity: within 85% RH (no condensing)
Dimensions 174(W)×135(H)×159(D)mm (protruding part not included)
Panel cutout dimensions 165W(+2-0)×130H(+2-0)mm
Panel thickness 1.6 to 3.2mm
Weight Approx. 2.3kg
CE marking certification EMC directives EN61326-1
Safety standard EN61010-1, EN62311
(Please specify requirement for CE marking certified product when making your order)
(DC power supply is not certificationed to CE Marking.)

 

 
Option
BCO BCD parallel data output interface
BCI BCD parallel data input interface
DAC D/A converter interface (2ch interface installed)
485 RS-485 communication interface*
ODN DeviceNet interface*
CCL CC-Link interface*
Number of option installations Up to 4 options and 1 serial communication interface are available. (With*, only 1 option is available.)
 
Attachments
AC input cord (2m), (only for AC specifications) 1
AC input cord replacement plug (only for AC specifications and CE compatibility) 1
Mini-driver for terminal block connection 1
Loadcell connector 1
External I/O signal connector 1
Operation Manual 1
Ferrite core (only for CE compatibility) 2
BCD output connector (with BCD output option) 1
BCD input connector (with BCD input option) 1
D/A converter connector (with D/A converter) 1
CC-link connector (with CC-Link option) 1
DeviceNet connector (with DeviceNet option) 1


iMS Motion Solution (Johor) Sdn Bhd (Company Registration 1098771-W)
 
No.7, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia.
TEL:+607-8635240 FAX: +607-8637240
MOBILE: +6019-6774477
EMAIL: info@ims.com.my | WhatsApp  | www.ims.com.my
HOTLINE : 1700-818-330
whatsapp us now !

Brand Name
MEISTER | GGM | Sanyo Denki | ElectroCraft | EDrive | SHIHLIN ELECTRIC | AUTONICS | UI Robot | Mitsubishi CNC | PANASONICApex Dynamics | NISSEI GTR | UNIPULSE | CREVIS
 
MOTION DEVICES SPECIALIST | SYSTEM and CONTROL INTEGRATION |
| Induction Motor | Speed Control Motor | Reversible Motor |Brake Motor |BLDC Motor |DC Motor |Planetary Gear Motor | Servo Motor | Stepping Motor | Linear Actuator Motor | Lead Screw Motor|Close Loop Stepping Motor | Customization Motors | Right Angle Gear Head | Precision Gear Reducer |PLC | Motion Controller |HMI /Touch Screen| Inverter |CNC Controller |Multi Axis Robots |IPC | SCADA |Monitoring Software | Embeded PC | Remote IO |TPC | Motion Card | Loadcell |PPC |
 
Return / Refund Policy : 
All goods sold are not returnable & we accept goods ex-change with equal or lower value of good purchased. If the ex-change items are higher than purchased items, buyer shall top up the differential cost. All payment made are not refundable, please confirm the purchase items code & cost with our sales representative before place orders.
 
Shipping and Fulfillment :
Thank you for your purchase. Once we have confirmed your payment, we will prepare and ship out your order out within 24-48 hours.( For ex-stock items only, Indent items subject to delivery stated in quotation & conversation in emails). Once your order has been shipped out, you will receive an email notification with the tracking number and tracking details inside.
 
Private Policy
General Statement of Principles 
As described in detail below, any information we gather at this web site is strictly for our use and is not shared with any other entity, public or private, for any reason - period. We will not sell or give away any lists or other data that we may retain and we do not purchase such information from other sources.
Statistical Data 
Our servers (as most) track IP addresses and referring pages to help with site maintenance and improvements. This data is viewed only as anonymous statistics to show the busiest times of the day or week, pages with errors and how effective our advertising has been. This information is not used for any other purpose.
Personal Information Collected - Order Forms
With the exception of credit card info, we store the information from your order form to allow us to track consulting issues or refer to a previous order to help provide some customer service. You may elect to have your information completely removed from this system by e-mailing us at info@ims.com.my with your request. We do not store any type of sales information.
Information Correction or Removal 
If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at info@ims.com.my with the details of your request. If you wish to contact us further, please find complete contact information on our contact page.
Cookies
Cookies are files with small amount of data, which may include an anonymous unique identifier. Cookies are sent to your browser from a web site and stored on your computer's hard drive. We use 'cookies' to store your cart contents for you. You can instruct your browser to refuse all cookies or to indicate when a cookie is being sent. However, if you do not accept cookies, you may not be able to use the checkout section of our site.
 
Changes To This Privacy Policy
This Privacy Policy is effective as of 1st Jan 2019 and will remain in effect except with respect to any changes in its provisions in the future, which will be in effect immediately after being posted on this page.

Specifications

Sorry, currently do not have any product specifications
Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.