Sensors Application Sharing

FA Automation Sharing

Festo Automation Suite | Multiprotocol

Find out how to set the desired Ethernet protocol of your CMMT-AS servo drive controller with multiprotocol function directly into the Festo Automation Suite.

UNIPULSE | Press machine demo with portable force indicator F490A

Portable force indicator F490A - Compact, lightweight thus handy! - Record measured data with one-touch operation - Up to 6 calibration value can be stored - Variety of information displays (Measured value, graph, recorded data) Each button type load cell is equipped with a "load button" that is used to measure load accurately. Install a load cell with load being applied perpendicularly to the load button and measure the load value. For more details: https://www.newpages.com.my/v2/en/company/727140/product/214063/3654136/F490A-Portable-digital-inicator.html iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #unipulse #f490a #portableindicator

Festo Automation Suite

Find out how to commission your servo drives and mechanics, controllers and valve terminals as well as remote IO extremely easily and super fast in just 5 steps with the Festo Automation Suite commissioning software. Click here for the download and all details of the Festo Automation Suite: https://www.festo.com/automationsuite For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #festo #festoautomationsuite #suite

SANMOTION G | Next-Level Servo System That Combines "Strength" and "Flexibility"

- Powerful Performance - 1. Evolved Servo Performance ・Speed frequency response : 3.5 kHz ・Extended output range at high speeds : 1.15 times extended ・Encoder resolution : 17, 20, 23, 27 bit (battery-less) 2. Improved Reliability and Maintainability This servo system has various safety functions to ensure the safety of operators, such as monitoring of power supply status and communication quality, estimation of the remaining life of the holding brake, and prevention of electronic component failures. Also, the battery-less encoder eliminates the need for battery replacement, improving the reliability and maintainability of equipment. 3. Usable in Various Environments ・Altitude : 2000 m or less ・Vibration resistance: Amplifier : 6.0 m/s2, Motor: 50.0 m/s2 ・Operation temperature range: Amplifier : 0 to 60 ¡æ, Motor: 0 to 40 ¡æ - Eco- and User-Friendly - 4. Compact, Lightweight, and Energy-saving ・Motor length : Max. 22 % shorter ・Amplifier mass : Max. 5 % lighter ・Motor mass : Max. 28 % lighter ・Amplifier power loss : 22% reduction ・Motor power loss : 8.4% reduction ・Holding brake power consumption : 44% reduction 5. Easy and User-friendly ・Integrated power line and brake line ・Abundant optional cables ・Abundant connector options ・Shorten startup time : "Advanced tuning" - Measures mechanical resonance, friction, and load inertia and automatically adjusts to optimal parameters ・Built-in safety functions : ISO13849-1(Cat3,PL=e) IEC61508(SIL3)

Autonics | The SFL series safety light

Autonics | The SFL series safety light curtains are installed in potentially dangerous or hazardous areas to safeguard personnel from injury. . #autonics Safety Product Series Safety products are installed in potentially dangerous or hazardous areas to safeguard personnel from injury and protect equipment from damage Various detection models (finger/hand/hand-body detection) and safety functions are available for diverse applications. For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #safetyproducts #safetylightcurtain #muting #blanking #safety #automation #factory #safetyfirstmalaysia #autonicsMY #autonicsMYA #safetylightcurtains #safetycontrollers #safetyswitches

Autonics | Semiconductor Production Process

1. Oxidizing / Thin film process 2. Photo process 3. Etching process 4. Test process 5. Packaging process 6. Assembly process For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #Autonics #Semiconductor #Production #packaging

SANYO DENKI in Convenience Stores | Application Examples

In convenience stores, SANYO DENKI products are used in equipment that heats and cools food products and provides various convenient services. or more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #ims #imsmotionsolution #SanyoDenki #application #conveniencestore

Autonics HMI GP | LP-A Series

"A New Standard for HMIs" Flexible, Elegant, User-Friendly, Space-Saving HMIs provide users with an interface to directly interact with machines in order to control and monitor various processes For more details: https://www.ims.com.my/ iMS Motion Solution (Johor) Sdn Bhd Tel: +607-8635240 Email: info@ims.com.my #imsmotionsolution #IMS #autonics #autonicsMY #HMI #flexible #elegant

[UNIPULSE] Let's try UNI-Format! | Continuous Data Transmission

When you select either RS-232C or RS-485 to a communication interface, you will find "UNI-Format" as one of the options. By transmitting commands from a host, not only communicating weight values and/or parameters, but also continuous transmission can be operated. This communication format can be used easily on a terminal software on PC. Continuous mode transmits specified information continuously without commands from the host. Indicators with RS-485 communication is equipped as standard: F701-P https://www.newpages.com.my/v2/en/company/727140/product/414093/3724145/F701-P-Global-standard-model-basic-performance-design-weighing-indicator.html

Autonics | AiSA closed loop stepper motor AC power driver

[UNIPULSE] Let's try UNI-Format! | Command mode demo

When you select either RS-232C or RS-485 to a communication interface, you will find "UNI-Format" as one of the options. By transmitting commands from a host, not only communicating weight values and/or parameters, but also continuous transmission can be operated. This communication format can be used easily on a terminal software on PC. By transmitting a command to an ID specified by a host (on PC side), the corresponding indicator sends back a response.

Festo | Perfectly sized automation components with engineering tools

#Thebluepath to higher efficiency with Felix Borgiel, Product Manager Software and Tools. His work is all about helping you to find the right solution for your application. Your way to #zeroemissions!

Unboxing the FESTO new cylinder switches SDBT-MSX and SDBT/C-MSB

SDBT-MSX cylinder switch with auto teach-in function offers extremely simple, quick and safe commissioning without precision adjustment and readjustment. SDBT/C-MSB cylinder switches with solid-state technology offer a longer service life compared to conventional mechanical reed switch and ideal for basic application.

Autonics | Better, Wider, Compact LiDAR LSC Series

[UNIPULSE] Secret for installation method of UTM: Case . Without vibration [Torque meter]

Compact & lightweight, accuracy, responsivity, durability, stability, non-contact¡­ Achieved the world's best in all aspects. UTMIII is a UNIPULSE's rotary torque meter supported by many customers. ------ One of the advantages to UTM series is that this torque sensor can directly measure torque which applies at its main axis. Such advantages can be obtained! - There are less points to adjust alignment. - By rotating in slow speed, fluctuations such as misalignments or angle errors can be checked from torque values. - When rotating, the housing vibrates due to fluctuations such as misalignments or angle errors. From these vibrations, misalignments can be checked. With misalignments and angle errors¡­ - A paperclip fell off from the housing of UTM due to vibrations. - Phenomenon such as large detection widths on the vibration monitor V100 were confirmed.

Motion made easy ¨C Festo Simplified Motion Series

The integrated drives of the Festo Simplified Motion Series are the perfect solution for users who are looking for an electric alternative for simple movement and positioning tasks, but who don¡¯t want the commissioning process for traditional electric drive systems that can often be quite complex.

Festo The quickest way ever to the right handling system

There really is no quicker or easier way: the Handling Guide Online (HGO) considerably increases your engineering efficiency and gives you the certainty that your system is correctly sized. Watch as Bill Fontaine, Electric Automation Business Development, and Steve Hunt from iAutomation discuss the benefits HGO provided for iAutomation¡¯s customer

Festo New Website Launch

Festo is world-renowned for its innovative, cost-effective and reliable automation solutions, and we've rebuilt our website to live up to those attributes. Visit Festo today, learn about our new website and discover the tools and support you need more easily, quickly and efficiently. Discover the new Festo.com now: bit.ly/3vKl6Zn

Festo service unit component series MS-Basic

The MS-Basic in a polymer housing offers you attractively priced basic components focused on the most important technical functions of compressed air preparation such as pressure regulation, filter regulation and manual or electric switch-on. And it is fully compatible with the MS series. This allows you to create the best possible mix of low-cost basic functions and any high-end functions you need.

UNIPULSE/ROBOTEC | Intelligent Assist Balancer Moon Lifter

Moon Lifter (Intelligent Assist Balancer) is a lifting device that assists you a heavy object weighing 10 to 1500 kg and moves it with a light force. Gentle transportation that does not damage workpieces has been achieved by holding them with hands directly. Moon Lifter has been used for the following work operations such as: - for setting workpieces on processing machines & assembling processes at manufacturing - for transporting bags filled with raw materials & charging in tanks - for packing finished products & stacking folding containers

Efficient Automation Control with Autonics HMI

HMIs provide users with an interface to directly interact with machines in order to control and monitor various processes. #FLEXIBLE #ELEGANT #USERFRIENDLY

Machine Vision Systems from Festo

From inspection to identification, barcode reading to robotic guidance, measurement to color analysis, Festo provides machine vision solutions to suit your needs. With higher resolutions, more powerful software tools, easier integration and more flexibility, the latest generation of SBS vision sensors provide the right features and tools to meet your demanding machine vision requirements.

Festo Pneumatic extension modules VTOP

The VTOP is ideal for control applications with positioner and additional instrumentation. The pneumatic extension modules facilitate a complete setup, without tedious searches for components and time-consuming installation, and thus greatly simplify maintenance. The new installation concept VTOP with patented, integrated air routing allows you to combine the individual modules you need, and easily retrofit other modules at any time.

Festo Proximity sensor SDBT-MSX

Magneto-resistive proximity sensor for T-slot, for installation from above. Compliant with EU explosion protection directive (ATEX) and fitted with NAMUR output. - Measuring principle: magneto-resistive - Oil-resistant, welding field-resistant, resistant to welding spatter - Can be inserted into the slot from above, secured with screw - LED switching status indication - Cable length 0.3 ... 5 m - SDBT-EX6: To EU Explosion Protection Directive (ATEX

Festo standard NAMUR valve VSNC with new variants

The standard NAMUR valve VSNC is certified worldwide in accordance with the usual explosion-protection standards and can be used in many industry segments and applications - now with new variants. Its distinguishing features are a modern design, durable quality and fully tested

Unipluse 3 best indicators for force measurement! Manage assembly process by waveform comparison

In case of Y-axis as Load & X-axis as Time: - Waveform varies as speed differs. That is, basis of OK waveform is liable to change. In case of Y-axis as Load & X-axis as Distance: - Waveform is stabilized every time even if speed differs. Thus, Waveform comparison is effective.

UNIPULSE OK/NOK judgement for cap tightening by UNISERVO [Torque Actuator]

What is UNISERVO? UNISERVO is a rotary actuator with a built-in torque meter. Space-saving can be achieved for equipment or test machine that are used with motors and torque meters in combination. What makes UNISERVO so splendid? Space-saving As UNISERVO can measure torque while driving motor, a length in axial direction can be significantly reduced in the case of torque measurement. Built-in torque meter is UTM series made by UNIPULSE UTM is a torque meter that achieves the world's highest level of accuracy and outstanding stability of zero point. Therefore, UNISERVO can perform high-accuracy & high-responsive torque measurement.

Festo smart positioner CMSH with HART communication

The CMSH provides you with all the benefits of a highly dynamic, low-wear positioning system with high air output and a long service life. You now only need one device for the fast and precise control of actuators, whether large or small, linear or rotary, single- acting or double-acting. Together with the low internal air consumption, this reduces costs. Featuring 2-wire technology, HART communication, condition monitoring functions and a modular system with many variants, the CMSH offers excellent flexibility for a great number of applications.

Let's build a simple weighing scale with FC400 [UNIPULSE]

We used FC400-DAC, a weighing indicator with abundant weighting functions. FC400-DAC is a compact weighing Indicator with D/A converter. It is suitable for many weighing applications such as hopper scale, packing scale, weight level meter, etc¡­. Either voltage or current output, corresponding to the indicated value, is available.

FESTO connect & discover | Electric Automation

Output Torque, Rotation Speed & Angle Simultaneously! TC80-D3V

Autonics : Photoelectric Sensor Lens Cutting and Quality Inspection Demo

Autonics : 16 mm Control Switches S/L Series

Autonics TMH Series

Switch To Desktop Version